Advert

adclickmedia

Bypass Windows XP Password Using Safe Mode

Posted by Kareem Quadri On May 12, 2013 20 comments

Many times you cannot boot into normal Windows mode because of wrong user password, you can start Windows XP in safe mode and login the default admin account to bypass other user password.

What is XP safe mode?

All versions of Windows come with a diagnostic setup called "Safe Mode". Safe mode starts Windows with a limited set of files and drivers. Startup programs do not run in safe mode, and only the basic drivers needed to start Windows are installed. Many average PC users are unfamiliar with the purpose of Safe Mode and only encounter it when there has been a system crash or similar problem. They are then puzzled by what to do next.
Safe mode is the best thing to use if you are having any problems booting your system. The purpose of Safe Mode is to help troubleshoot computer problems by operating with a bare minimum of drivers and Windows components. It can also be used if you have any issues form running any new software on your computer. By reducing what is running, Safe Mode can help you diagnose a problem caused by a faulty driver or software.

What is XP default administrator account?

Windows XP passwords are used to protect the system against unauthorized intrusion. The default Administrator account on an XP machine is typically reserved for performing special tasks on the computer since it has no security restrictions placed upon it. It is often overlooked, and many users do not even know that it exists. If you have forgotten the password for the normal account on your XP system, you can bypass it by login the default admin account.

How to get into XP safe mode and bypass user password?

Step 1. To get into the Windows XP Safe mode, as the computer is booting press and hold your "F8 Key" which should bring up the "Windows Advanced Options Menu" as shown below.




Note: With some computers, if you press and hold a key as the computer is booting you will get a stuck key message. If this occurs, instead of pressing and holding the "F8 key", tap the "F8 key" continuously until you get the startup menu.

Step 2. Use your arrow keys to move to "Safe Mode with Command Prompt" and press your Enter key.

Step 3. Select the operating system to start.


.

Step 4. Windows XP Safe Mode is loading.
This image has been resized. Click this bar to view the full image. The original image is sized %1%2.

Step 5. A logon screen displays all OS user names, there are 2 accounts in this example: Administrator, Mike. Here we assume that you want to bypass the "Mike" account password. Enter password for your administrator account to get in safe mode, the default password is blank if you never set a password for administrator before.

It is similar with the normal logon screen, but normal logon screen will only list Mike.
Screenshots: Safe Mode logon screen VS normal logon screen

Step 6. After entering safe mode, you can see the Windows command prompt. Enter "net user" and press Enter to list all the user names in your Windows XP. Enter "net user Mike 123456789" and press Enter. It means that you want to reset "Mike" account password to "123456789". When it takes effect, you can login the "Mike" account with the new password of "123456789".


.

Step 7. Enter "shutdown -r" and press Enter, the System will be restart, then you can access Mike account in normal logon mode.